include kitty noctalia theme

.gitignore

@@ -3,7 +3,7 @@ hypr/.config/hypr/env.conf
 hypr/.config/hypr/env.sh
 hypr/.config/hypr/monitor_setup.lua
 # Noctalia template output (shell-owned, regenerated on palette change)
-hypr/.config/kitty/themes/noctalia.conf
+# hypr/.config/kitty/themes/noctalia.conf
 # Caelestia runtime output (shell-owned, regenerated on scheme change)
 hypr/.config/hypr/scheme/
 *~lock.*#

basic/skripte/mount-buntes-monster-drives.sh

@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+set -Eeuo pipefail
+
+SERVER="buntes-monster"
+SERVER_IP="192.168.0.4"
+
+MOUNTS=(
+  "/mnt/anbau:/mnt/anbau"
+  "/mnt/bilder:/mnt/bilder"
+)
+
+# Re-run as root when needed.
+if [[ "${EUID}" -ne 0 ]]; then
+  exec sudo "$0" "$@"
+fi
+
+# Preserve ownership for the user who invoked sudo.
+OWNER="${SUDO_USER:-${USER}}"
+OWNER_UID="$(id -u "$OWNER")"
+OWNER_GID="$(id -g "$OWNER")"
+
+for entry in "${MOUNTS[@]}"; do
+  IFS=":" read -r remote_path local_path <<< "$entry"
+
+  # Create the mount point if necessary and give it to the invoking user.
+  install -d \
+    -o "$OWNER_UID" \
+    -g "$OWNER_GID" \
+    -m 0755 \
+    "$local_path"
+
+  # Do not remount an already-mounted location.
+  if mountpoint -q "$local_path"; then
+    echo "Already mounted: $local_path"
+    continue
+  fi
+
+  echo "Mounting $SERVER:$remote_path at $local_path..."
+
+  mount \
+    -t nfs \
+    -o rw,sync,addr="$SERVER_IP" \
+    "$SERVER:$remote_path" \
+    "$local_path"
+
+  echo "Mounted: $local_path"
+done

hypr/.config/caelestia/shell.json

@@ -7,6 +7,9 @@
     "background": {
         "wallpaperEnabled": true
     },
+    "dashboard": {
+        "showWeather": true
+    },
     "general": {
         "apps": {
             "audio": [

hypr/.config/hypr/hypridle.conf

@@ -1,33 +0,0 @@
-# hypridle.conf — screensaver only.
-# Managed by dotfiles (stow hypr).
-#
-# IDLE OWNERSHIP: Noctalia owns dim / lock / screen-off / suspend via its own
-# [idle] block in ~/.config/noctalia/config.toml. hypridle is started only for
-# the Noctalia shell (see hyprland.lua) and contributes just the tte
-# screensaver. Do not re-add lock/DPMS listeners here — that duplication is
-# what made two idle managers fight over the same transitions.
-#
-# lock_cmd goes through scripts/lock.sh, which resolves the active shell from
-# env.lua. That keeps a manually started hypridle under Caelestia from calling
-# `noctalia ...` (which would silently do nothing).
-#
-# WARNING — do not add DPMS dispatchers back to this file. This Hyprland
-# (hyprmod Lua runtime, 0.56.x) evaluates `hyprctl dispatch` args as Lua, and
-# the dpms dispatcher takes a TABLE, not a boolean:
-#     WRONG (silently becomes a TOGGLE, ignoring the argument):
-#         hyprctl dispatch 'hl.dsp.dpms(true)'
-#     RIGHT:
-#         hyprctl dispatch 'hl.dsp.dpms({action="enable"})'
-# A toggle in after_sleep_cmd turns the display OFF on resume, and with
-# misc:key_press_enables_dpms = false nothing could wake it again.
-
-general {
-    lock_cmd = ~/.config/hypr/scripts/lock.sh
-}
-
-# Screensaver via backend wrappers (switch backend in modules/screensaver.lua).
-listener {
-    timeout = 300
-    on-timeout = ~/.config/hypr/scripts/screensaver-start.sh
-    on-resume = ~/.config/hypr/scripts/screensaver-stop.sh
-}

hypr/.config/hypr/hyprland.lua

@@ -40,11 +40,6 @@ hl.on("hyprland.start", function()
     else -- default: "noctalia"
         hl.exec_cmd("noctalia &")
     end
-    -- activate hypridle when not using Caelestia (has its own idle-ing mechnism)
-    if env.shell ~= "caelestia" then
-	    hl.exec_cmd("hypridle &")
-    end
-
 	hl.exec_cmd("sh ~/.config/hypr/scripts/portal-host-override.sh")
 	hl.exec_cmd("sh ~/.config/hypr/scripts/ensure-mime-defaults.sh")
 end)
@@ -74,4 +69,3 @@ if fid_gui2 then
     fid_gui2:close()
     require("hyprland-gui")
 end
-

hypr/.config/hypr/hyprsaver.toml

@@ -1,40 +0,0 @@
-# hyprsaver.toml — chill playlist: calm shaders + cool palettes, cycling.
-# Location: ~/.config/hypr/hyprsaver.toml (stowed from dotfiles).
-# Names verified against `hyprsaver --list-shaders` / `--list-palettes`.
-# Everything else uses hyprsaver's built-in defaults (see
-# /usr/share/hyprsaver/examples/config.toml for the full reference).
-
-[general]
-fps = 30
-shader = "cycle"
-palette = "cycle"
-shader_cycle_interval = 300
-palette_cycle_interval = 60
-cycle_order = "random"
-synced = true
-shader_playlist = "chill"
-palette_playlist = "chill"
-
-[playlists.chill]
-shaders = [
-    "plasma",
-    "marble",
-    "snowfall",
-    "aurora",
-    "clouds",
-    "planet",
-    "starfield",
-    "fireflies",
-]
-palettes = [
-    "vaporwave",
-    "frost",
-    "ocean",
-    "aurora",
-]
-
-[behavior]
-fade_in_ms = 800
-fade_out_ms = 400
-dismiss_on = ["key", "mouse_move", "mouse_click", "touch"]
-exclusive_keyboard = true

hypr/.config/hypr/modules/keybinds.lua

@@ -9,135 +9,134 @@ local exec = reg.exec
 -- See https://wiki.hypr.land/Configuring/Keywords/
 
 -- Example binds, see https://wiki.hypr.land/Configuring/Binds/ for more
-bind(var.mainMod .. " + RETURN", exec(var.terminal), { description = "Open terminal (kitty)" })
-bind(var.mainMod .. " + ALT + RETURN", exec(var.terminal_tmux), { description = "Open terminal (kitty)" })
+bind(var.mainMod .. " + RETURN", exec(var.terminal), { description = "Open terminal" })
+bind(var.mainMod .. " + ALT + RETURN", exec(var.terminal_tmux), { description = "Open tmux in terminal" })
 bind(var.mainMod .. " + Q", hl.dsp.window.close(), { description = "Close focused window" })
 bind(
 	var.mainMod .. " + ESCAPE",
 	exec(command.session),
 	{ description = "Session menu (logout/reboot/shutdown)" }
 )
-bind(var.mainMod .. " + SHIFT + ESCAPE", exec(command.logout), { description = "Exit Hyprland" })
-bind(var.mainMod .. " + CTRL + ESCAPE", exec(command.shutdown), { description = "Power off the system" })
-bind(var.mainMod .. " + ALT + ESCAPE", exec(command.reboot), { description = "Reboot the system" })
-bind(var.mainMod .. " + E", exec(var.fileManager), { description = "Open file manager (dolphin)" })
-bind(var.mainMod .. " + V", hl.dsp.window.float({ action = "toggle" }), { description = "Toggle floating window" })
+bind(var.mainMod .. " + SHIFT + ESCAPE", exec(command.logout), { description = "Session: logout" })
+bind(var.mainMod .. " + CTRL + ESCAPE", exec(command.shutdown), { description = "Session: power off" })
+bind(var.mainMod .. " + ALT + ESCAPE", exec(command.reboot), { description = "Session: reboot" })
+bind(var.mainMod .. " + E", exec(var.fileManager), { description = "Open file manager" })
+bind(var.mainMod .. " + V", hl.dsp.window.float({ action = "toggle" }), { description = "Floating window toggle" })
 bind(var.mainMod .. " + SPACE", exec(command.menu), { description = "Open app launcher" })
-bind(var.mainMod .. " + P", hl.dsp.window.pseudo(), { description = "Toggle pseudo-tiling" })
-bind(var.mainMod .. " + SHIFT + J", hl.dsp.layout("togglesplit"), { description = "Toggle split layout" })
-bind(var.mainMod .. " + I", exec("firefox &"), { description = "Open Firefox" })
-bind(var.mainMod .. " + n", exec("nm-connection-editor"), { description = "Network manager" })
-bind(var.mainMod .. " + comma", exec(command.settings), { description = "settings menu" })
-bind(var.mainMod .. " + S", exec(command.control_center), { description = "Control center" })
+bind(var.mainMod .. " + P", hl.dsp.window.pseudo(), { description = "Pseudo-tiling toggle" })
+bind(var.mainMod .. " + SHIFT + J", hl.dsp.layout("togglesplit"), { description = "Split layout toggle" })
+bind(var.mainMod .. " + I", exec(var.internet_explorer), { description = "Open internet explorer" })
+bind(var.mainMod .. " + n", exec("nm-connection-editor"), { description = "Open network manager" })
+bind(var.mainMod .. " + comma", exec(command.settings), { description = "Open settings" })
+bind(var.mainMod .. " + S", exec(command.control_center), { description = "Open start menu" })
+bind(var.mainMod .. " + ALT + H", exec("hyprmod"), {description = "Open hyprmod (hyprland config GUI)"})
+bind(var.mainMod .. " + period", exec(command.emoji), { description = "Open emoji picker" })
+bind(var.mainMod .. " + ALT + S", exec(var.systemmonitor), {description = "Open systemmonitor"})
+
+bind(var.mainMod .. " + TAB", function()
+	hl.plugin.hyprtasking.toggle("cursor")
+end, { description = "Workspace: overview" })
 
 -- Move focus with mainMod or Vim-style
-bind(var.mainMod .. " + CTRL + h", hl.dsp.focus({ direction = "left" }), { description = "Focus window left" })
-bind(var.mainMod .. " + CTRL + l", hl.dsp.focus({ direction = "right" }), { description = "Focus window right" })
-bind(var.mainMod .. " + CTRL + k", hl.dsp.focus({ direction = "up" }), { description = "Focus window up" })
-bind(var.mainMod .. " + CTRL + j", hl.dsp.focus({ direction = "down" }), { description = "Focus window down" })
+bind(var.mainMod .. " + CTRL + h", hl.dsp.focus({ direction = "left" }), { description = "Window: focus left" })
+bind(var.mainMod .. " + CTRL + l", hl.dsp.focus({ direction = "right" }), { description = "Window: focus right" })
+bind(var.mainMod .. " + CTRL + k", hl.dsp.focus({ direction = "up" }), { description = "Window: focus up" })
+bind(var.mainMod .. " + CTRL + j", hl.dsp.focus({ direction = "down" }), { description = "Window: focus down" })
 
 -- Move windows with mainMod or Vim-style
-bind(var.mainMod .. " + SHIFT + h", hl.dsp.window.move({ direction = "left" }), { description = "Move window left" })
+bind(var.mainMod .. " + SHIFT + h", hl.dsp.window.move({ direction = "left" }), { description = "Window: move left" })
 bind(
 	var.mainMod .. " + SHIFT + l",
 	hl.dsp.window.move({ direction = "right" }),
-	{ description = "Move window right" }
+	{ description = "Window: move right" }
 )
-bind(var.mainMod .. " + SHIFT + k", hl.dsp.window.move({ direction = "up" }), { description = "Move window up" })
-bind(var.mainMod .. " + SHIFT + j", hl.dsp.window.move({ direction = "down" }), { description = "Move window down" })
+bind(var.mainMod .. " + SHIFT + k", hl.dsp.window.move({ direction = "up" }), { description = "Window: move up" })
+bind(var.mainMod .. " + SHIFT + j", hl.dsp.window.move({ direction = "down" }), { description = "Window: move down" })
 
 -- Resize focused window with mainMod + Arrows
 bind(
 	var.mainMod .. " + left",
 	hl.dsp.window.resize({ x = -10, y = 0, relative = true }),
-	{ description = "Resize window left" }
+	{ description = "Window: resize left" }
 )
 bind(
 	var.mainMod .. " + right",
 	hl.dsp.window.resize({ x = 10, y = 0, relative = true }),
-	{ description = "Resize window right" }
+	{ description = "Window: resize right" }
 )
 bind(
 	var.mainMod .. " + up",
 	hl.dsp.window.resize({ x = 0, y = -10, relative = true }),
-	{ description = "Resize window up" }
+	{ description = "Window: resize up" }
 )
 bind(
 	var.mainMod .. " + down",
 	hl.dsp.window.resize({ x = 0, y = 10, relative = true }),
-	{ description = "Resize window down" }
+	{ description = "Window: resize down" }
 )
 
 -- Switch workspaces with mainMod + [0-9]
-bind(var.mainMod .. " + 1", hl.dsp.focus({ workspace = 1 }), { description = "Switch to workspace 1" })
-bind(var.mainMod .. " + 2", hl.dsp.focus({ workspace = 2 }), { description = "Switch to workspace 2" })
-bind(var.mainMod .. " + 3", hl.dsp.focus({ workspace = 3 }), { description = "Switch to workspace 3" })
-bind(var.mainMod .. " + 4", hl.dsp.focus({ workspace = 4 }), { description = "Switch to workspace 4" })
-bind(var.mainMod .. " + 5", hl.dsp.focus({ workspace = 5 }), { description = "Switch to workspace 5" })
-bind(var.mainMod .. " + 6", hl.dsp.focus({ workspace = 6 }), { description = "Switch to workspace 6" })
-bind(var.mainMod .. " + 7", hl.dsp.focus({ workspace = 7 }), { description = "Switch to workspace 7" })
-bind(var.mainMod .. " + 8", hl.dsp.focus({ workspace = 8 }), { description = "Switch to workspace 8" })
-bind(var.mainMod .. " + 9", hl.dsp.focus({ workspace = 9 }), { description = "Switch to workspace 9" })
-bind(var.mainMod .. " + 0", hl.dsp.focus({ workspace = 10 }), { description = "Switch to workspace 10" })
-bind("XF86AudioRaiseVolume", exec("wpctl set-volume -l 1.5 @DEFAULT_AUDIO_SINK@ 5%+"), {
-	repeating = true,
-	description = "Volume up",
-})
-bind("XF86AudioLowerVolume", exec("wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-"), {
-	locked = true,
-	description = "Volume down",
-})
+bind(var.mainMod .. " + 1", hl.dsp.focus({ workspace = 1 }), { description = "Workspace: switch to 1" })
+bind(var.mainMod .. " + 2", hl.dsp.focus({ workspace = 2 }), { description = "Workspace: Switch to 2" })
+bind(var.mainMod .. " + 3", hl.dsp.focus({ workspace = 3 }), { description = "Workspace: Switch to 3" })
+bind(var.mainMod .. " + 4", hl.dsp.focus({ workspace = 4 }), { description = "Workspace: Switch to 4" })
+bind(var.mainMod .. " + 5", hl.dsp.focus({ workspace = 5 }), { description = "Workspace: Switch to 5" })
+bind(var.mainMod .. " + 6", hl.dsp.focus({ workspace = 6 }), { description = "Workspace: Switch to 6" })
+bind(var.mainMod .. " + 7", hl.dsp.focus({ workspace = 7 }), { description = "Workspace: Switch to 7" })
+bind(var.mainMod .. " + 8", hl.dsp.focus({ workspace = 8 }), { description = "Workspace: Switch to 8" })
+bind(var.mainMod .. " + 9", hl.dsp.focus({ workspace = 9 }), { description = "Workspace: Switch to 9" })
+bind(var.mainMod .. " + 0", hl.dsp.focus({ workspace = 10 }), { description = "Workspace: Switch to 10" })
 
 -- Move active window to a workspace with mainMod + SHIFT + [0-9]
 bind(
 	var.mainMod .. " + SHIFT + 1",
 	hl.dsp.window.move({ workspace = 1 }),
-	{ description = "Move window to workspace 1" }
+	{ description = "Window: move to workspace 1" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 2",
 	hl.dsp.window.move({ workspace = 2 }),
-	{ description = "Move window to workspace 2" }
+	{ description = "Window: move to workspace 2" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 3",
 	hl.dsp.window.move({ workspace = 3 }),
-	{ description = "Move window to workspace 3" }
+	{ description = "Window: move to workspace 3" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 4",
 	hl.dsp.window.move({ workspace = 4 }),
-	{ description = "Move window to workspace 4" }
+	{ description = "Window: move to workspace 4" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 5",
 	hl.dsp.window.move({ workspace = 5 }),
-	{ description = "Move window to workspace 5" }
+	{ description = "Window: move to workspace 5" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 6",
 	hl.dsp.window.move({ workspace = 6 }),
-	{ description = "Move window to workspace 6" }
+	{ description = "Window: move to workspace 6" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 7",
 	hl.dsp.window.move({ workspace = 7 }),
-	{ description = "Move window to workspace 7" }
+	{ description = "Window: move to workspace 7" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 8",
 	hl.dsp.window.move({ workspace = 8 }),
-	{ description = "Move window to workspace 8" }
+	{ description = "Window: move to workspace 8" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 9",
 	hl.dsp.window.move({ workspace = 9 }),
-	{ description = "Move window to workspace 9" }
+	{ description = "Window: move to workspace 9" }
 )
 bind(
 	var.mainMod .. " + SHIFT + 0",
 	hl.dsp.window.move({ workspace = 10 }),
-	{ description = "Move window to workspace 10" }
+	{ description = "Window: move to workspace 10" }
 )
 
 -- # Example special workspace (scratchpad)
@@ -150,44 +149,44 @@ bind(
 bind(
 	var.mainMod .. " + mouse_down",
 	hl.dsp.focus({ workspace = "e+1" }),
-	{ description = "Next workspace (scroll down)" }
+	{ description = "Workspace: next (scroll down)" }
 )
 bind(
 	var.mainMod .. " + mouse_up",
 	hl.dsp.focus({ workspace = "e-1" }),
-	{ description = "Previous workspace (scroll up)" }
+	{ description = "Workspace: previous (scroll up)" }
 )
 
 -- Move/resize windows with mainMod + LMB/RMB and dragging
 bind(var.mainMod .. " + mouse:272", hl.dsp.window.drag(), {
 	mouse = true,
-	description = "Move window with mouse",
+	description = "Window: move with mouse",
 })
 bind(var.mainMod .. " + mouse:273", hl.dsp.window.resize(), {
 	mouse = true,
-	description = "Resize window with mouse",
+	description = "Window: resize with mouse",
 })
 
 -- Laptop multimedia keys for volume and LCD brightness
 bind("XF86AudioRaiseVolume", exec("wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+"), {
 	repeating = true,
 	locked = true,
-	description = "Volume up (repeat)",
+	description = "Media: volume up (repeat)",
 })
 bind("XF86AudioLowerVolume", exec("wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-"), {
 	repeating = true,
 	locked = true,
-	description = "Volume down (repeat)",
+	description = "Media: volume down (repeat)",
 })
 bind("XF86AudioMute", exec("wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"), {
 	repeating = true,
 	locked = true,
-	description = "Mute audio",
+	description = "Media: mute audio",
 })
 bind("XF86AudioMicMute", exec("wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"), {
 	repeating = true,
 	locked = true,
-	description = "Mute microphone",
+	description = "Media: mute microphone",
 })
 bind("XF86MonBrightnessUp", exec("brightnessctl -e4 -n2 set 5%+"), {
 	repeating = true,
@@ -203,19 +202,19 @@ bind("XF86MonBrightnessDown", exec("brightnessctl -e4 -n2 set 5%-"), {
 -- Requires playerctl
 bind("XF86AudioNext", exec("playerctl next"), {
 	locked = true,
-	description = "Next track",
+	description = "Media: next track",
 })
 bind("XF86AudioPause", exec("playerctl play-pause"), {
 	locked = true,
-	description = "Play/Pause",
+	description = "Media: play/pause",
 })
 bind("XF86AudioPlay", exec("playerctl play-pause"), {
 	locked = true,
-	description = "Play/Pause",
+	description = "Media: play/pause",
 })
 bind("XF86AudioPrev", exec("playerctl previous"), {
 	locked = true,
-	description = "Previous track",
+	description = "Media: previous track",
 })
 
 -- Screenshots
@@ -233,14 +232,12 @@ bind("SHIFT + PRINT", exec("hyprshot -m active --output-folder " .. var.screensh
 })
 
 bind(var.mainMod .. " + L", exec(command.lock), { locked = true, description = "Lock screen" })
-bind(var.mainMod .. " + SHIFT + L", exec(command.screensaver), { description = "Start screensaver (any key quits)" })
-bind(var.mainMod .. " + K", exec(command.keybinds_show), { description = "Show keybind overview" })
+bind(var.mainMod .. " + K", exec(command.keybinds_show), { description = "Keybinds: show overview" })
 bind(var.mainMod .. " + W", exec(command.wallpaper_select), { description = "Wallpaper select" })
 
 -- Caelestia extras
 if env.shell == "caelestia" then
     bind(var.mainMod .. " + SHIFT + V", exec(command.clipboard), { description = "Clipboard history" })
-    bind(var.mainMod .. " + period", exec(command.emoji), { description = "Emoji picker" })
     bind(var.mainMod .. " + SHIFT + K", exec(command.show_all), { description = "Toggle utilities" })
     bind("CTRL + ALT + C", exec(command.clear_notifications), { description = "Clear notifications" })
 end

hypr/.config/hypr/modules/lock.lua

@@ -1,33 +0,0 @@
--- Single source of truth for "how do I lock this session", keyed on the
--- active shell in env.lua. Consumed by two callers:
---   * scripts/lock.sh (hypridle's lock_cmd) - loaded via plain dofile
---   * modules/shell_commands.lua (SUPER+L) - loaded via require
---
--- Both contexts load this file, so it must NOT use require("env"): Lua's
--- default package.path is cwd-relative, and that only resolves inside
--- ~/.config/hypr. hypridle's cwd is not guaranteed. Resolve by path instead.
-local config_home = os.getenv("XDG_CONFIG_HOME") or os.getenv("HOME") .. "/.config"
-local prefix = config_home .. "/hypr/"
-
-local function load_env()
-    local fid = io.open(prefix .. "env.lua")
-    if fid then
-        fid:close()
-        return dofile(prefix .. "env.lua")
-    end
-    return dofile(prefix .. "env_example.lua")
-end
-
-local LOCK = {
-    noctalia = "noctalia msg session lock",
-    caelestia = "caelestia shell lock lock",
-}
-
-local env = load_env()
-
-return {
-    shell = env.shell,
-    -- nil for an unknown shell; scripts/lock.sh treats that as a hard error
-    -- rather than reporting success while nothing is actually locked.
-    cmd = LOCK[env.shell],
-}

hypr/.config/hypr/modules/screensaver.lua

@@ -1,13 +0,0 @@
--- Screensaver commands for idle (hypridle on-timeout/on-resume) and manual
--- (SUPER+SHIFT+L) use. scripts/screensaver-start.sh and
--- scripts/screensaver-stop.sh exec the .start / .stop command below.
---
--- Active backend: tte (fullscreen kitty + terminal-text-effects).
-return {
-	start = "~/.config/hypr/scripts/launch-screensaver.sh",
-	stop = "~/.config/hypr/scripts/screensaver-stop.sh",
-	-- Alternative backend: hyprsaver (GPU fractal shaders, wlr-layer-shell).
-	-- Swap the commented pair in to switch (no other file changes needed).
-	-- start = "hyprsaver",
-	-- stop = "hyprsaver --quit",
-}

hypr/.config/hypr/modules/shell_commands.lua

@@ -1,53 +1,52 @@
-
 local env = require("env")
 
--- Shell-agnostic on purpose: the active shell is resolved inside lock.sh from
--- env.lua, so hypridle's lock_cmd and this bind cannot drift apart.
-local LOCK = "~/.config/hypr/scripts/lock.sh"
-
 local commands = {
-    session = "",
-    logout = "",
-    shutdown = "",
-    reboot = "",
-    menu = "",
-    settings = "",
-    control_center = "",
-    lock = LOCK,
-    screensaver = "sh ~/.config/hypr/scripts/screensaver-start.sh force",
-    wallpaper_select = "",
-    keybinds_show = "sh ~/.config/hypr/scripts/show-keybinds.sh",
-    clipboard = "",
-    clipboard_delete = "",
-    emoji = "",
-    show_all = "",
-    clear_notifications = "",
+	session = "",
+	logout = "",
+	shutdown = "",
+	reboot = "",
+	menu = "",
+	settings = "",
+	control_center = "",
+	lock = "",
+	wallpaper_select = "",
+	keybinds_show = "sh ~/.config/hypr/scripts/show-keybinds.sh",
+	clipboard = "",
+	clipboard_delete = "",
+	emoji = "",
+	show_all = "",
+	clear_notifications = "",
 }
 
+-- Noctalia
 if env.shell == "noctalia" then
-    commands.session = "noctalia msg panel-toggle session"
-    commands.logout = "command -v noctalia >/dev/null 2>&1 && noctalia msg session logout || hyprctl dispatch exit"
-    commands.shutdown = "noctalia msg session shutdown"
-    commands.reboot = "noctalia msg session reboot"
-    commands.menu = "noctalia msg panel-toggle launcher"
-    commands.settings = "noctalia msg settings-toggle"
-    commands.control_center = "noctalia msg panel-toggle control-center"
-    commands.wallpaper_select = "noctalia msg panel-toggle wallpaper"
+	commands.session = "noctalia msg panel-toggle session"
+	commands.logout = "command -v noctalia >/dev/null 2>&1 && noctalia msg session logout || hyprctl dispatch exit"
+	commands.shutdown = "noctalia msg session shutdown"
+	commands.reboot = "noctalia msg session reboot"
+	commands.menu = "noctalia msg panel-toggle launcher"
+	commands.settings = "noctalia msg settings-toggle"
+	commands.control_center = "noctalia msg panel-toggle control-center"
+	commands.wallpaper_select = "noctalia msg panel-toggle wallpaper"
+	commands.lock = "noctalia msg session lock"
+	commands.emoji = "noctalia msg panel-toggle launcher '/emo '"
+
+-- Caelesia
 elseif env.shell == "caelestia" then
-    commands.session = "caelestia shell drawers toggle session"
-    commands.logout = "hyprctl dispatch exit"
-    commands.shutdown = "systemctl poweroff"
-    commands.reboot = "systemctl reboot"
-    commands.menu = "caelestia shell drawers toggle launcher"
-    commands.settings = "caelestia shell drawers toggle dashboard"
-    commands.control_center = "caelestia shell drawers toggle sidebar"
-    commands.wallpaper_select = "caelestia shell drawers toggle launcher && sleep 0.1 && wtype \">wallpaper \""
-    commands.clipboard = "caelestia clipboard"
-    commands.clipboard_delete = "caelestia clipboard -d"
-    commands.emoji = "caelestia emoji -p"
-    commands.show_all = "caelestia shell drawers toggle utilities"
-    commands.clear_notifications = "caelestia shell notifs clear"
+	commands.session = "caelestia shell drawers toggle session"
+	commands.logout = "hyprctl dispatch exit"
+	commands.shutdown = "systemctl poweroff"
+	commands.reboot = "systemctl reboot"
+	commands.menu = "caelestia shell drawers toggle launcher"
+	commands.settings = "caelestia shell drawers toggle dashboard"
+	commands.control_center = "caelestia shell drawers toggle sidebar"
+	commands.wallpaper_select = 'caelestia shell drawers toggle launcher && sleep 0.1 && wtype ">wallpaper "'
+	commands.clipboard = "caelestia clipboard"
+	commands.clipboard_delete = "caelestia clipboard -d"
+	commands.emoji = "caelestia emoji -p"
+	commands.show_all = "caelestia shell drawers toggle utilities"
+	commands.clear_notifications = "caelestia shell notifs clear"
+	commands.lock = "caelestia shell lock lock"
 end
 
-
 return commands

hypr/.config/hypr/modules/variables.lua

@@ -18,6 +18,8 @@ return {
     mainMod = "SUPER",
     terminal = terminal,
     terminal_tmux = terminal .. " -e tmux",
-    fileManager = "dolphin",
+    fileManager = terminal .. " -e yazi", -- "dolphin",
     screenshot_folder = "~/Bilder/Screenshots/",
+    internet_explorer = "firefox",
+    systemmonitor = terminal .. " -e btop",
 }

hypr/.config/hypr/modules/windows_and_workspaces.lua

@@ -62,6 +62,12 @@ hl.window_rule({
 	},
 	opacity = "0.90 0.80",
 })
+hl.window_rule({
+	match = {
+		class = ".*keybinds.*",
+	},
+	opacity = "0.75 0.50",
+})
 -- Noctalia shell surfaces: blur bars/panels/dock/notifications and let
 -- Noctalia run its own animations (no Hyprland layer animation on top).
 hl.layer_rule({
@@ -101,18 +107,9 @@ hl.window_rule({
 	border_size = 0,
 })
 
--- Manual tte screensaver preview (SUPER+SHIFT+L): fullscreen kitty.
-hl.window_rule({
-	name = "screensaver-fullscreen",
-	match = {
-		class = "org.screensaver",
-	},
-	fullscreen = true,
-	float = true,
-})
-
 hl.window_rule({
 	name = "floating-windows",
-	match = { class = "(imv|.*hyprmod)" },
 	float = true,
+	match = { class = "(imv|.*hyprmod|.*[Bb]itwarden.*|ktouch)" },
+	size = "1080 920",
 })

hypr/.config/hypr/screensaver.txt

@@ -1,4 +0,0 @@
-hyprland
-// idle looks good on you
-
-ArchTop is relaxing 🧘

hypr/.config/hypr/scripts/launch-screensaver.sh

@@ -1,51 +0,0 @@
-#!/usr/bin/env bash
-# launch-screensaver.sh — idle-triggered tte screensaver (hypridle on-timeout).
-# Spawns one fullscreen kitty running screensaver-tte.sh per monitor.
-# Usage: launch-screensaver.sh [force]
-#   force   ignore the screensaver-off toggle file.
-# Toggle off: touch ~/.local/state/hypr/screensaver-off
-#
-# Lessons baked in: no focus-restore after spawn (it raced the new window and
-# caused flash-then-nothing), no pkill -f patterns anywhere (teardown is done
-# by screensaver-stop.sh via exact client PIDs).
-
-set -euo pipefail
-
-SCREENSAVER_CLASS="org.screensaver"
-TOGGLE_FILE="$HOME/.local/state/hypr/screensaver-off"
-
-command -v tte >/dev/null 2>&1 || exit 1
-command -v kitty >/dev/null 2>&1 || exit 1
-
-# Already running (precise client check).
-if hyprctl clients -j 2>/dev/null | jq -e '.[] | select(.class=="org.screensaver")' >/dev/null 2>&1; then
-    exit 0
-fi
-
-# Opt-out toggle (unless forced, e.g. manual invocation).
-if [[ -f "$TOGGLE_FILE" ]] && [[ "${1:-}" != "force" ]]; then
-    exit 1
-fi
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-
-# hyprctl prints plain-text errors (not JSON) when HYPRLAND_INSTANCE_SIGNATURE
-# is stale (e.g. shell/tmux predates the current compositor). Fail clearly
-# instead of dumping a jq parse error.
-monitors_json="$(hyprctl monitors -j 2>/dev/null)" || {
-    echo "launch-screensaver: hyprctl failed - is HYPRLAND_INSTANCE_SIGNATURE stale? (try a fresh terminal)" >&2
-    exit 1
-}
-echo "$monitors_json" | jq -e . >/dev/null 2>&1 || {
-    echo "launch-screensaver: hyprctl did not return JSON - stale HYPRLAND_INSTANCE_SIGNATURE?" >&2
-    exit 1
-}
-
-# NOTE: hyprmod Lua runtime (Hyprland 0.56.x) evaluates `hyprctl dispatch` args
-# as Lua — classic `dispatch focusmonitor eDP-1` fails. Dispatchers must be
-# hl.dsp.* expressions. Focus each monitor before exec so the saver kitty
-# spawns there; deliberately no focus-restore afterwards (spawn race).
-for m in $(echo "$monitors_json" | jq -r '.[] | .name'); do
-    hyprctl dispatch "hl.dsp.focus({monitor=\"$m\"})" >/dev/null 2>&1
-    hyprctl dispatch "hl.dsp.exec_cmd('kitty --class=\"$SCREENSAVER_CLASS\" --override font_size=18 --override window_padding_width=0 --override background_opacity=1 --override mouse_hide_wait=1.0 -e \"$SCRIPT_DIR/screensaver-tte.sh\"')" >/dev/null 2>&1
-done

hypr/.config/hypr/scripts/lock.sh

@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-# lock.sh — lock the session with the active shell's own lock command.
-# The mapping lives in modules/lock.lua (reads env.lua), so neither hypridle's
-# lock_cmd nor the SUPER+L bind hardcodes a shell. This is what keeps a
-# manually started hypridle under Caelestia from failing on `noctalia ...`.
-#
-# Usage: lock.sh   (no args; safe to call while locked)
-
-set -euo pipefail
-
-# Resolve from this script's own location so it works through the
-# ~/.config/hypr symlink and does not depend on XDG_CONFIG_HOME.
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-LOCK_LUA="$(cd "$SCRIPT_DIR/.." && pwd)/modules/lock.lua"
-
-CMD="$(LOCK_LUA="$LOCK_LUA" lua -e 'print(dofile(os.getenv("LOCK_LUA")).cmd)' 2>/dev/null)" || {
-    echo "lock: cannot read modules/lock.lua" >&2
-    exit 1
-}
-
-# Empty here means env.lua named a shell with no known lock command. Fail loudly
-# instead of exiting 0, or a caller would think the session got locked.
-[[ -n "$CMD" ]] || {
-    echo "lock: no lock command for the active shell (check env.lua)" >&2
-    exit 1
-}
-
-# Word-split on purpose: CMD is a command line, not a single path.
-# shellcheck disable=SC2086
-exec $CMD

hypr/.config/hypr/scripts/screensaver-start.sh

@@ -1,24 +0,0 @@
-#!/usr/bin/env bash
-# screensaver-start.sh — exec the start command from modules/screensaver.lua.
-# Usage: screensaver-start.sh [force] (forwarded to .sh targets, e.g. the tte
-# launcher's toggle bypass; dropped for bare commands like `hyprsaver`).
-
-set -euo pipefail
-
-CMD="$(lua -e 'print(dofile(os.getenv("HOME").."/.config/hypr/modules/screensaver.lua").start)' 2>/dev/null)" || {
-    echo "screensaver-start: cannot read modules/screensaver.lua" >&2
-    exit 1
-}
-CMD="${CMD/#\~/$HOME}"
-[[ -n "$CMD" ]] || {
-    echo "screensaver-start: empty start command" >&2
-    exit 1
-}
-
-if [[ "$CMD" == *.sh ]]; then
-    exec "$CMD" "$@"
-else
-    # Bare command, may carry flags (e.g. "hyprsaver --quit").
-    # shellcheck disable=SC2086
-    exec $CMD
-fi

hypr/.config/hypr/scripts/screensaver-stop.sh

@@ -1,36 +0,0 @@
-#!/usr/bin/env bash
-# screensaver-stop.sh — exec the stop command from modules/screensaver.lua.
-# When it points back here (tte backend), run the built-in teardown below:
-# kill saver windows by Hyprland client PID (class org.screensaver) plus
-# stray tte processes (exact comm match). Never `pkill -f <pattern>`: a
-# full-cmdline pattern also matches bystander shells merely mentioning it.
-
-set -euo pipefail
-
-SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-ME="$(realpath "$SCRIPT_DIR/screensaver-stop.sh")"
-
-WANT="$(lua -e 'print(dofile(os.getenv("HOME").."/.config/hypr/modules/screensaver.lua").stop)' 2>/dev/null)" || {
-    echo "screensaver-stop: cannot read modules/screensaver.lua" >&2
-    exit 1
-}
-WANT="${WANT/#\~/$HOME}"
-
-# Alternative backend configured (e.g. "hyprsaver --quit"): run it instead.
-if [[ "$(realpath -m "$WANT")" != "$ME" ]]; then
-    # shellcheck disable=SC2086
-    exec $WANT
-fi
-
-# --- tte teardown ---
-pids="$(hyprctl clients -j 2>/dev/null | jq -r '.[] | select(.class=="org.screensaver") | .pid' 2>/dev/null)" || pids=""
-if [[ -n "${pids:-}" ]]; then
-    # shellcheck disable=SC2086
-    kill $pids 2>/dev/null || true
-fi
-
-# tte runs under comm "tte" (verified); -x matches the comm only, so this
-# cannot hit bystander shells.
-pkill -x tte 2>/dev/null || true
-
-exit 0

hypr/.config/hypr/scripts/screensaver-tte.sh

@@ -1,41 +0,0 @@
-#!/usr/bin/env bash
-# screensaver-tte.sh — runs inside each fullscreen tte kitty.
-# Loops random tte effects until any keypress, then exits (kitty closes).
-# Child teardown uses the exact PID ($!) — never pkill -f patterns, which
-# would also match bystander shells mentioning the class name.
-
-set -euo pipefail
-
-SCREENSAVER_TEXT="$HOME/.config/hypr/screensaver.txt"
-
-trap 'exit 0' SIGINT SIGTERM SIGHUP SIGQUIT
-
-printf '\033]11;rgb:00/00/00\007' # black background
-
-input="$SCREENSAVER_TEXT"
-[[ -f "$input" ]] || input="/etc/hostname"
-
-while true; do
-    tte -i <(fastfetch --pipe) \
-        --frame-rate 60 --canvas-width 0 --canvas-height 0 \
-        --anchor-canvas c --anchor-text c \
-        --random-effect --exclude-effects dev_worm \
-        --no-eol --no-restore-cursor &
-    TPID=$!
-    # Wait for tte to appear (Python startup) before polling it.
-    for _ in $(seq 1 10); do
-        kill -0 "$TPID" 2>/dev/null || break
-        pgrep -x tte >/dev/null 2>&1 && break
-        sleep 0.1
-    done
-    while kill -0 "$TPID" 2>/dev/null; do
-        if read -r -n1 -t 1; then
-            kill "$TPID" 2>/dev/null || true
-            wait "$TPID" 2>/dev/null || true
-            exit 0
-        fi
-    done
-    wait "$TPID" 2>/dev/null || true
-    # Throttle respawn if tte exits instantly (e.g. a sub-second effect).
-    sleep 0.2
-done

hypr/.config/hypr/scripts/show-keybinds.sh

@@ -42,16 +42,16 @@ if [[ "${1:-}" == "--internal-pick" ]]; then
     rc=0
     sel="$(fzf --delimiter "$SEP" --with-nth 2.. --cycle --info=inline \
         --prompt 'keybinds> ' --header 'type to filter  ·  Enter executes  ·  Esc closes' \
-        < "$pick_file")" || rc=$?
+        <"$pick_file")" || rc=$?
     rm -f "$pick_file"
-    if (( rc != 0 )) || [[ -z "$sel" ]]; then
+    if ((rc != 0)) || [[ -z "$sel" ]]; then
         exit 0
     fi
     cmd="${sel%%"$SEP"*}"
     if [[ -n "$cmd" ]]; then
         # Detach into its own session so the command outlives the picker
         # window (kitty/pty teardown would otherwise signal its process group).
-        setsid -f sh -c "$cmd" >/dev/null 2>&1 < /dev/null
+        setsid -f sh -c "$cmd" >/dev/null 2>&1 </dev/null
     fi
     exit 0
 fi
@@ -65,7 +65,7 @@ if [[ -s "$SIDECAR" ]]; then
     have_sidecar=1
 fi
 
-if (( ! have_sidecar )) && ! hyprctl binds -j >/dev/null 2>&1; then
+if ((! have_sidecar)) && ! hyprctl binds -j >/dev/null 2>&1; then
     echo "show-keybinds: nothing to show: no keybind registry ($SIDECAR) and no Hyprland session" >&2
     exit 1
 fi
@@ -74,7 +74,7 @@ rows=()
 cmds=()
 keys=()
 
-if (( have_sidecar )); then
+if ((have_sidecar)); then
     while IFS="$SEP" read -r key description cmd; do
         key="${key//mouse:272/LMB}"
         key="${key//mouse:273/RMB}"
@@ -84,21 +84,21 @@ if (( have_sidecar )); then
         rows+=("$(printf '%-26s  %s' "$key" "$description")")
         cmds+=("$cmd")
         keys+=("$key")
-    done < "$SIDECAR"
+    done <"$SIDECAR"
 else
     while IFS="$SEP" read -r modmask key description submap; do
         case "$key" in
-            mouse:272) key="LMB" ;;
-            mouse:273) key="RMB" ;;
+        mouse:272) key="LMB" ;;
+        mouse:273) key="RMB" ;;
         esac
 
         chord=""
         # Rebuild "SUPER + SHIFT + Q" from the modmask bits.
         i=0
-        while (( i < ${#MOD_ORDER[@]} )); do
+        while ((i < ${#MOD_ORDER[@]})); do
             bit=${MOD_ORDER[i]}
             name=${MOD_ORDER[i + 1]}
-            if (( modmask & bit )); then
+            if ((modmask & bit)); then
                 chord+="${name} + "
             fi
             i=$((i + 2))
@@ -119,7 +119,7 @@ else
     done < <(hyprctl binds -j | jq -r '.[] | [(.modmask | tostring), .key, .description, .submap] | join("\u001f")')
 fi
 
-if (( ${#rows[@]} == 0 )); then
+if ((${#rows[@]} == 0)); then
     echo "show-keybinds: no keybinds found." >&2
     exit 1
 fi
@@ -135,7 +135,7 @@ for i in "${!rows[@]}"; do
         lines+=("${cmds[$i]}$SEP${rows[$i]}")
     fi
 done
-mapfile -t lines < <(printf '%s\n' "${lines[@]}" | LC_ALL=C sort -f -t "$SEP" -k2)
+mapfile -t lines < <(printf '%s\n' "${lines[@]}" | LC_ALL=C sort -f -t "$SEP" -k2.29,2)
 
 if [[ "${1:-}" == "--print" ]]; then
     printf '%s\n' "${lines[@]}" | cut -d "$SEP" -f2-
@@ -149,13 +149,14 @@ fi
 # ---------------------------------------------------------------------------
 rm -f /tmp/keybinds.??????.list 2>/dev/null || true
 list="$(mktemp /tmp/keybinds.XXXXXX.list)"
-printf '%s\n' "${lines[@]}" > "$list"
+printf '%s\n' "${lines[@]}" >"$list"
 
 if command -v kitty >/dev/null 2>&1; then
-    kitty --class keybinds --title Keybinds "$0" --internal-pick "$list"
+    kitty --override font_size=16 --class keybinds --title Keybinds "$0" \
+        --internal-pick "$list"
     exit 0
 fi
 
 # No kitty: fall back to a plain printout.
 printf '%s\n' "${lines[@]}" | cut -d "$SEP" -f2-
-rm -f "$list"
+rm -f "$list"

hypr/.config/kitty/themes/noctalia.conf

@@ -0,0 +1,32 @@
+color0 #45475a
+color1 #f38ba8
+color2 #a6e3a1
+color3 #f9e2af
+color4 #89b4fa
+color5 #f5c2e7
+color6 #94e2d5
+color7 #a6adc8
+color8 #585b70
+color9 #f37799
+color10 #89d88b
+color11 #ebd391
+color12 #74a8fc
+color13 #f2aede
+color14 #6bd7ca
+color15 #bac2de
+
+cursor                #f5e0dc
+cursor_text_color     #1e1e2e
+background            #1e1e2e
+foreground            #cdd6f4
+selection_foreground  #cdd6f4
+selection_background  #585b70
+active_border_color   #cba6f7
+inactive_border_color #313244
+url_color             #cba6f7
+
+active_tab_foreground   #11111b
+active_tab_background   #cba6f7
+inactive_tab_foreground #a3b4eb
+inactive_tab_background #313244
+cursor_trail_color      #a3b4eb

hypr/.config/noctalia/config.toml

@@ -1,68 +1,153 @@
-# Portable Noctalia config — generated by noctalia-sync-from-gui.sh.
-# Validate with: noctalia config validate ~/.config/noctalia/config.toml
-
 [bar.default]
-background_opacity = 0.52
-capsule = false
-center = []
-end = []
+background_opacity = 0.50999998860061169
+capsule = true
+center = [ "session", "launcher", "control-center", "wallpaper" ]
+end = [
+    "tray",
+    "notifications",
+    "network",
+    "bluetooth",
+    "volume",
+    "brightness",
+    "temp",
+    "cpu",
+    "sysmon",
+    "battery",
+    "clock"
+]
 margin_ends = 0
 panel_overlap = 0
 position = "bottom"
 radius = 0
-start = []
+start = [ "workspaces", "media" ]
 thickness = 28
 
+[desktop_widgets]
+enabled = false
+schema_version = 2
+widget_order = []
+
+    [desktop_widgets.grid]
+    cell_size = 16
+    major_interval = 4
+    visible = true
+
+    [desktop_widgets.widget]
+
 [dock]
-background_opacity = 0.68
+background_opacity = 0.67999998480081558
+
+[idle]
+behavior_order = [ "backlight-dim", "kbd-off", "lock", "screen-off", "suspend" ]
+
+    [idle.behavior.backlight-dim]
+    action = "command"
+    command = "brightnessctl -s set 10"
+    enabled = true
+    resume_command = "brightnessctl -r"
+    timeout = 300.0
+
+    [idle.behavior.kbd-off]
+    action = "command"
+    command = "brightnessctl -sd rgb:kbd_backlight set 0"
+    enabled = true
+    resume_command = "brightnessctl -rd rgb:kbd_backlight"
+    timeout = 300.0
+
+    [idle.behavior.lock]
+    action = "lock"
+    enabled = true
+    timeout = 900.0
+
+    [idle.behavior.screen-off]
+    action = "screen_off"
+    enabled = false
+    timeout = 1800.0
+
+    [idle.behavior.suspend]
+    action = "lock_and_suspend"
+    enabled = true
+    timeout = 2700.0
+
+[keybinds]
+down = [ "Down", "Ctrl+j" ]
+left = [ "Left", "Ctrl+h" ]
+right = [ "Right", "Ctrl+l" ]
+up = [ "Up", "Ctrl+k" ]
+
+[location]
+auto_locate = true
 
 [lockscreen_widgets]
 enabled = false
 schema_version = 2
+widget_order = [ "lockscreen-login-box@eDP-1" ]
+
+    [lockscreen_widgets.grid]
+    cell_size = 16
+    major_interval = 4
+    visible = true
+
+    [lockscreen_widgets.widget."lockscreen-login-box@eDP-1"]
+    box_height = 196.0
+    box_width = 810.0
+    cx = 960.0
+    cy = 898.0
+    output = "eDP-1"
+    placement_height = 1080.0
+    placement_width = 1920.0
+    rotation = 0.0
+    type = "login_box"
+
+        [lockscreen_widgets.widget."lockscreen-login-box@eDP-1".settings]
+        background_color = "surface_variant"
+        background_opacity = 0.88
+        background_radius = 12.0
+        center_password_text = false
+        input_opacity = 1.0
+        input_radius = 6.0
+        layout = "regular"
+        show_caps_lock = true
+        show_keyboard_layout = true
+        show_login_button = true
+        show_media = true
+        show_session_buttons = true
+        show_unlock_hint = true
+        show_weather = true
 
 [shell]
 font_family = "JetBrainsMono Nerd Font Mono"
+telemetry_enabled = true
 
-[shell.panel]
-launcher_placement = "attached"
-transparency_mode = "glass"
+    [shell.panel]
+    launcher_placement = "attached"
+    transparency_mode = "glass"
 
 [theme]
-mode = "dark"
 builtin = "Catppuccin"
+mode = "dark"
 
-[theme.templates]
-enable_builtin_templates = true
-builtin_ids = []
+    [theme.templates]
+    builtin_ids = [ "gtk3", "gtk4", "hyprland", "kitty" ]
+    enable_builtin_templates = true
 
 [wallpaper]
-directory = ""
+directory = "/home/mathias/nextcloud/Photos/Wallpapers"
 
-[idle]
-behavior_order = ["backlight-dim", "kbd-off", "lock", "screen-off", "suspend"]
+    [wallpaper.default]
+    path = "/home/mathias/nextcloud/Photos/Wallpapers/eigen/20180318-4825-Teneriffa_LaPalma-2.jpg"
 
-[idle.behavior.backlight-dim]
-timeout = 300
-action = "command"
-command = "brightnessctl -s set 10"
-resume_command = "brightnessctl -r"
+    [wallpaper.last]
+    path = "/home/mathias/nextcloud/Photos/Wallpapers/eigen/20180318-4825-Teneriffa_LaPalma-2.jpg"
 
-[idle.behavior.kbd-off]
-timeout = 300
-action = "command"
-# This ThinkPad exposes the keyboard backlight as tpacpi::kbd_backlight;
-# the previous rgb:kbd_backlight matched no device and errored out silently.
-command = "brightnessctl -sd tpacpi::kbd_backlight set 0"
-resume_command = "brightnessctl -rd tpacpi::kbd_backlight"
+    [wallpaper.monitors.eDP-1]
+    path = "/home/mathias/nextcloud/Photos/Wallpapers/eigen/20180318-4825-Teneriffa_LaPalma-2.jpg"
 
-[idle.behavior.lock]
-timeout = 900
-action = "lock"
+[widget.clock]
+format = "{:%Y-%m-%d|%H:%M}"
 
-[idle.behavior.screen-off]
-timeout = 1800
-action = "screen_off"
+[widget.network]
+show_label = false
 
-[idle.behavior.suspend]
-timeout = 2700
-action = "lock_and_suspend"
+[widget.sysmon]
+stat = "gpu_usage"

setup/hypr/packages.txt

@@ -19,6 +19,7 @@
 @pacman
 hyprland
 hypridle
+hyprpm
 xdg-desktop-portal-hyprland
 hyprpolkitagent
 pantheon-shortcut-overlay

setup/utils/packages.txt

@@ -24,6 +24,7 @@ rbw
 nfs-utils
 code
 imv
+bitwarden
 
 @aur
 supersonic-desktop

term/.bashrc

@@ -46,3 +46,8 @@ fi
 if command -v fastfetch >/dev/null 2>&1; then
   fastfetch --config ~/.config/fastfetch/config.jsonc
 fi
+
+# Added by LM Studio CLI (lms)
+export PATH="$PATH:/home/mathias/.lmstudio/bin"
+# End of LM Studio CLI section
+

term/.config/fish/config.fish

@@ -148,3 +148,9 @@ alias fdh="fd -H"
 alias fdhi="fd -HI"
 alias rgh="rg --hidden"
 alias rghi="rg --hidden --no-ignore"
+
+export PATH="$HOME/.cargo/bin:$PATH"
+# Added by LM Studio CLI (lms)
+
+set -gx PATH $PATH /home/mathias/.lmstudio/bin
+# End of LM Studio CLI section

term/.config/nvim/lua/plugins/none-ls.lua

@@ -17,11 +17,22 @@ return {
 				css = { "prettier" },
 				scss = { "prettier" },
 				yaml = { "prettier" },
-				markdown = { "prettier" },
+				markdown = { "prettier_markdown" },
 				sh = { "shfmt" },
 				bash = { "shfmt" },
 				rust = { "rustfmt" },
 			},
+			formatters = {
+				prettier_markdown = {
+					inherit = "prettier",
+					prepend_args = {
+						"--prose-wrap",
+						"always",
+						"--print-width",
+						"80",
+					},
+				},
+			},
 		})
 
 		vim.keymap.set({ "n", "v" }, "<leader>lf", function()

term/.config/opencode/opencode.json

@@ -63,7 +63,7 @@
       "npm": "@ai-sdk/openai-compatible",
       "name": "LM Studio (local)",
       "options": {
-        "baseURL": "http://192.168.0.4:1234/v1"
+        "baseURL": "http://127.0.0.1:1234"
       },
       "models": {
         "qwen3.5-35b-a3b": {

term/.config/yazi/yazi.toml

@@ -9,3 +9,17 @@ id     = "git"
 group  = "git"
 url    = "*/"
 run    = "git"
+
+[opener]
+imv = [
+	{ run = "imv %s", orphan = true, spread = false, desc = "imv" },
+]
+mpv = [
+	{ run = "mpv %s", orphan = true, spread = false, desc = "mpv" },
+]
+
+[open]
+prepend_rules = [
+	{ mime = "image/*", use = "imv" },
+	{ mime = "video/*", use = "mpv" },
+]

test/lint.sh

@@ -31,7 +31,9 @@ say_pass() { printf 'ok:   %s\n' "$*"; PASS=$((PASS+1)); }
 # Exclusions: never lint tpm or general vendored plugin trees, whose third-party
 # scripts may legitimately fail `bash -n` and are not written/maintained here.
 EXCLUDE_VENDOR='(/tpm/|/plugins/|/plugins$)'
-mapfile -t SCRIPTS < <(git ls-files '*.sh' 2>/dev/null | grep -vE "$EXCLUDE_VENDOR")
+mapfile -t SCRIPTS < <(git ls-files '*.sh' 2>/dev/null | grep -vE "$EXCLUDE_VENDOR" | while IFS= read -r script; do
+    [[ -f "$script" ]] && printf '%s\n' "$script"
+done)
 if [[ ${#SCRIPTS[@]} -eq 0 ]]; then
     mapfile -t SCRIPTS < <(find . -name '*.sh' \
         -not -path './.git/*' -not -path '*/.git/*' \